Tuesday, 25 April 2017

FIR filter design using FSM

In this experiment, we designed a FIR filter using the Frequency Sampling Method(FSM). The filter was designed by coding in C language in Scilab. .In this technique the desired frequency response is uniformly sampled and inverse DFT is performed to obtain the corresponding impulse response
.Magnitude and phase response were plotted for observation and verification.
Posted by at

7 comments:

  1. Chaitanya S26 April 2017 at 02:21

    Nicely written

    ReplyDelete
  2. Unknown26 April 2017 at 04:17

    It is one of the simplest technique for filter design when the frequency response is specified

    ReplyDelete
  3. Unknown26 April 2017 at 06:17

    It is computationally easy.

    ReplyDelete
  4. shrinish_00126 April 2017 at 06:54

    FSM is used in the cases where desired response in known.

    ReplyDelete
  5. Unknown26 April 2017 at 06:54

    informative

    ReplyDelete
  6. Unknown26 April 2017 at 10:31

    The desired response is sampled in frequency domain

    ReplyDelete
  7. Unknown26 April 2017 at 23:45

    It doesn't produces optimum response.

    ReplyDelete

Subscribe to: Post Comments (Atom)